This application sends CoTag wandering patient data to the Event Processor.
The CoTagIO application interfaces with a CoTag Wandering patient systems concentrator.  The CoTag concentrator interfaces with CoTag wandering patient door controllers.  Before this application can be used CoTag IO definitions must be added to the EPS Database.  It is usually done with the AddIO application.  A somewhat typical CoTagIO Door Status display is shown below.

This screen shows the current status of all doors and what, if any, tags are at each door.

The following screen shows the CoTagIO Alarms screen.  This screen displays Wander door alarms and open/close door information.

The Exceptions, Statistics and Options screen displays error and configuration information.


Additional screen information to be added.